Skip Navigation
Skip to contents

Restor Dent Endod : Restorative Dentistry & Endodontics

OPEN ACCESS

Search

Page Path
HOME > Search
2 "G file"
Filter
Filter
Article category
Keywords
Publication year
Authors
Case Report
Successful nonsurgical treatment of type II dens invaginatus with 5 root canals using a self-adjusting file: a case report
George Táccio de Miranda Candeiro, Antônio Sérgio Teixeira de Menezes, Ana Carolina Saldanha de Oliveira, Flávio Rodrigues Ferreira Alves
Restor Dent Endod 2023;48(2):e17.   Published online April 27, 2023
DOI: https://doi.org/10.5395/rde.2023.48.e17
AbstractAbstract PDFPubReaderePub

The present report describes the endodontic treatment of an Oehlers type II dens invaginatus in a maxillary lateral incisor with 5 root canals, an extremely rare condition. Apical periodontitis and related symptoms were noted. Cone-beam computed tomography was used to aid the diagnosis, reveal tooth morphology, and assist in canal location. The pulp chamber was carefully accessed, and the root canals were explored under magnification. All root canals were prepared with an R25 Reciproc Blue system and sodium hypochlorite (NaOCl) irrigation. After initial preparation, a self-adjusting file (SAF) with NaOCl and ethylenediaminetetraacetic acid was used to complement the disinfection. Additionally, calcium hydroxide medication was applied. Vertical compaction was used to fill the canals with a calcium silicate-based endodontic sealer and gutta-percha. After 12 months, the patient exhibited healing of the periapical region, absence of symptoms, and normal dental function. In conclusion, this nonsurgical treatment protocol was successful in promoting the cure of apical periodontitis. Both complementary disinfection with an SAF and use of calcium hydroxide medication should be considered when choosing the best treatment approach for dens invaginatus with very complex anatomy.

  • 259 View
  • 21 Download
Close layer
Research Article
Effect of repetitive pecking at working length for glide path preparation using G-file
Jung-Hong Ha, Hyo-Jin Jeon, Rashid El Abed, Seok-Woo Chang, Sung-Kyo Kim, Hyeon-Cheol Kim
Restor Dent Endod 2015;40(2):123-127.   Published online January 7, 2015
DOI: https://doi.org/10.5395/rde.2015.40.2.123
AbstractAbstract PDFPubReaderePub
Objectives

Glide path preparation is recommended to reduce torsional failure of nickel-titanium (NiTi) rotary instruments and to prevent root canal transportation. This study evaluated whether the repetitive insertions of G-files to the working length maintain the apical size as well as provide sufficient lumen as a glide path for subsequent instrumentation.

Materials and Methods

The G-file system (Micro-Mega) composed of G1 and G2 files for glide path preparation was used with the J-shaped, simulated resin canals. After inserting a G1 file twice, a G2 file was inserted to the working length 1, 4, 7, or 10 times for four each experimental group, respectively (n = 10). Then the canals were cleaned by copious irrigation, and lubricated with a separating gel medium. Canal replicas were made using silicone impression material, and the diameter of the replicas was measured at working length (D0) and 1 mm level (D1) under a scanning electron microscope. Data was analysed by one-way ANOVA and post-hoc tests (p = 0.05).

Results

The diameter at D0 level did not show any significant difference between the 1, 2, 4, and 10 times of repetitive pecking insertions of G2 files at working length. However, 10 times of pecking motion with G2 file resulted in significantly larger canal diameter at D1 (p < 0.05).

Conclusions

Under the limitations of this study, the repetitive insertion of a G2 file up to 10 times at working length created an adequate lumen for subsequent apical shaping with other rotary files bigger than International Organization for Standardization (ISO) size 20, without apical transportation at D0 level.

Citations

Citations to this article as recorded by  
  • Glide Path – An Ineluctable Route for Successful Endodontic Mechanics: A Literature Review
    Mahima Bharat Mehta, Anupam Sharma, Aniket Jadhav, Aishwarya Handa, Abhijit Bajirao Jadhav, Ashwini A. Narayanan
    Journal of the International Clinical Dental Research Organization.2024; 16(2): 101.     CrossRef
  • Effect of repetitive up-and-down movements on torque/force generation, surface defects and shaping ability of nickel-titanium rotary instruments: an ex vivo study
    Moe Sandar Kyaw, Arata Ebihara, Yoshiko Iino, Myint Thu, Keiichiro Maki, Shunsuke Kimura, Pyae Hein Htun, Takashi Okiji
    BMC Oral Health.2024;[Epub]     CrossRef
  • Influence of the Number of Pecking Motions at Working Length on the Shaping Ability of Single-file Systems in Long Oval-shaped Curved Canals
    Lixiao Wang, Ruitian Lin, Hui Chen, Zihan Li, Franklin R. Tay, Lisha Gu
    Journal of Endodontics.2022; 48(4): 548.     CrossRef
  • Influence of pecking frequency at working length on the volume of apically extruded debris: A micro-computed tomography analysis
    Li-Xiao Wang, Hui Chen, Rui-Tian Lin, Li-Sha Gu
    Journal of Dental Sciences.2022; 17(3): 1274.     CrossRef
  • Comparison of the effects from coronal pre‐flaring and glide‐path preparation on torque generation during root canal shaping procedure
    Sang Won Kwak, Jung‐Hong Ha, Ya Shen, Markus Haapasalo, Hyeon‐Cheol Kim
    Australian Endodontic Journal.2022; 48(1): 131.     CrossRef
  • Effective Establishment of Glide-Path to Reduce Torsional Stress during Nickel-Titanium Rotary Instrumentation
    Ibrahim H. Abu-Tahun, Sang Won Kwak, Jung-Hong Ha, Asgeir Sigurdsson, Mehmet Baybora Kayahan, Hyeon-Cheol Kim
    Materials.2019; 12(3): 493.     CrossRef
  • Stress Generation during Pecking Motion of Rotary Nickel-titanium Instruments with Different Pecking Depth
    Jung-Hong Ha, Sang Won Kwak, Asgeir Sigurdsson, Seok Woo Chang, Sung Kyo Kim, Hyeon-Cheol Kim
    Journal of Endodontics.2017; 43(10): 1688.     CrossRef
  • Debris extrusion by glide-path establishing endodontic instruments with different geometries
    Jung-Hong Ha, Sung Kyo Kim, Sang Won Kwak, Rashid El Abed, Yong Chul Bae, Hyeon-Cheol Kim
    Journal of Dental Sciences.2016; 11(2): 136.     CrossRef
  • Effects of Pitch Length and Heat Treatment on the Mechanical Properties of the Glide Path Preparation Instruments
    Sang Won Kwak, Jung-Hong Ha, Chan-Joo Lee, Rashid El Abed, Ibrahim H. Abu-Tahun, Hyeon-Cheol Kim
    Journal of Endodontics.2016; 42(5): 788.     CrossRef
  • 271 View
  • 4 Download
  • 9 Crossref
Close layer

Restor Dent Endod : Restorative Dentistry & Endodontics
Close layer
TOP