Skip Navigation
Skip to contents

Restor Dent Endod : Restorative Dentistry & Endodontics

OPEN ACCESS

Author index

Page Path
HOME > Browse articles > Author index
Search
Victor Hugo dos Santos 1 Article
Bond strength of self-adhesive resin cements to composite submitted to different surface pretreatments
Victor Hugo dos Santos, Sandro Griza, Rafael Ratto de Moraes, André Luis Faria-e-Silva
Restor Dent Endod 2014;39(1):12-16.   Published online January 20, 2014
DOI: https://doi.org/10.5395/rde.2014.39.1.12
AbstractAbstract PDFPubReaderePub
Objectives

Extensively destroyed teeth are commonly restored with composite resin before cavity preparation for indirect restorations. The longevity of the restoration can be related to the proper bonding of the resin cement to the composite. This study aimed to evaluate the microshear bond strength of two self-adhesive resin cements to composite resin.

Materials and Methods

Composite discs were subject to one of six different surface pretreatments: none (control), 35% phosphoric acid etching for 30 seconds (PA), application of silane (silane), PA + silane, PA + adhesive, or PA + silane + adhesive (n = 6). A silicone mold containing a cylindrical orifice (1 mm2 diameter) was placed over the composite resin. RelyX Unicem (3M ESPE) or BisCem (Bisco Inc.) self-adhesive resin cement was inserted into the orifices and light-cured. Self-adhesive cement cylinders were submitted to shear loading. Data were analyzed by two-way ANOVA and Tukey's test (p < 0.05).

Results

Independent of the cement used, the PA + Silane + Adhesive group showed higher microshear bond strength than those of the PA and PA + Silane groups. There was no difference among the other treatments. Unicem presented higher bond strength than BisCem for all experimental conditions.

Conclusions

Pretreatments of the composite resin surface might have an effect on the bond strength of self-adhesive resin cements to this substrate.

Citations

Citations to this article as recorded by  
  • An Innovative Method of Permanent Retention on Veneered Crowns
    Yugandhar Garlapati, Sampath Krishna Veni, Jashva Vamsi Kogila, Polisetty Siva Krishna, K. N. Anand Kumar
    Journal of Indian Orthodontic Society.2025;[Epub]     CrossRef
  • Influence of mechanochemical treatment and oxygen inhibited layer on the adhesion of self-adhesive resin cement to bulk-fill composite resin
    Sreya Dutta, Samikhya Priyadarsani Sahu, Anushka Arora, Srikant Natarajan, Abhishek Parolia, Manuel Thomas
    Cumhuriyet Dental Journal.2024; 27(2): 79.     CrossRef
  • Substrate Rigidity Effect on CAD/CAM Restorations at Different Thicknesses
    César Rogério Pucci, Ana Paula Valente Pinho Mafetano, Alexandre Luiz Souto Borges, Guilherme Schmitt de Andrade, Amanda Maria de Oliveira Dal Piva, Cornelis J. Kleverlaan, João Paulo Mendes Tribst
    European Journal of Dentistry.2023; 17(04): 1020.     CrossRef
  • Microgap Formation between a Dental Resin-Matrix Computer-Aided Design/Computer-Aided Manufacturing Ceramic Restorative and Dentin after Various Surface Treatments and Artificial Aging
    Alexandros Galanopoulos, Dimitrios Dionysopoulos, Constantinos Papadopoulos, Petros Mourouzis, Kosmas Tolidis
    Applied Sciences.2023; 13(4): 2335.     CrossRef
  • Dental Luting Cements: An Updated Comprehensive Review
    Artak Heboyan, Anna Vardanyan, Mohmed Isaqali Karobari, Anand Marya, Tatevik Avagyan, Hamid Tebyaniyan, Mohammed Mustafa, Dinesh Rokaya, Anna Avetisyan
    Molecules.2023; 28(4): 1619.     CrossRef
  • Effect of full-step versus simplified resin cement luting strategies on the push-out bond strength of indirect resin composite restorations bonded to dentin
    Bianca Cristina Dantas da Silva, Isabelle Helena Gurgel de Carvalho, Taciana Emília Leite Vila-Nova, Gabriela Monteiro de Araújo, Boniek Castillo Dutra Borges, Marília Regalado Galvão Rabelo Caldas, Isauremi Vieira de Assunção, Mutlu Özcan, Rodrigo Othávi
    Journal of Adhesion Science and Technology.2023; 37(24): 3552.     CrossRef
  • Effect of various polymerization protocols on the cytotoxicity of conventional and self-adhesive resin-based luting cements
    Ece Irem Oguz, Ufuk Hasanreisoglu, Sadullah Uctasli, Mutlu Özcan, Mehmet Kiyan
    Clinical Oral Investigations.2020; 24(3): 1161.     CrossRef
  • Repair bond strength of resin composite to three aged CAD/CAM blocks using different repair systems
    Pinar Gul, Latife Altınok-Uygun
    The Journal of Advanced Prosthodontics.2020; 12(3): 131.     CrossRef
  • Evaluation of the Surface Characteristics of Dental CAD/CAM Materials after Different Surface Treatments
    Konstantinos Papadopoulos, Kimon Pahinis, Kyriaki Saltidou, Dimitrios Dionysopoulos, Effrosyni Tsitrou
    Materials.2020; 13(4): 981.     CrossRef
  • Adhesive Systems Used in Indirect Restorations Cementation: Review of the Literature
    Cristian Abad-Coronel, Belén Naranjo, Pamela Valdiviezo
    Dentistry Journal.2019; 7(3): 71.     CrossRef
  • Effects of different etching methods and bonding procedures on shear bond strength of orthodontic metal brackets applied to different CAD/CAM ceramic materials
    S. Kutalmış Buyuk, Ahmet Serkan Kucukekenci
    The Angle Orthodontist.2018; 88(2): 221.     CrossRef
  • Ceramic repairs with resins: silanization protocols
    Teresa Cristina Vasconcelos dos Santos
    Journal of Dental Health, Oral Disorders & Therapy.2018;[Epub]     CrossRef
  • Influence of different surface treatments on bond strength of novel CAD/CAM restorative materials to resin cement
    Meltem Bektaş Kömürcüoğlu, Elçin Sağırkaya, Ayça Tulga
    The Journal of Advanced Prosthodontics.2017; 9(6): 439.     CrossRef
  • Adhesive bonding to polymer infiltrated ceramic
    Judith SCHWENTER, Fredy SCHMIDLI, Roland WEIGER, Jens FISCHER
    Dental Materials Journal.2016; 35(5): 796.     CrossRef
  • Orthodontic bracket bonding to glazed full-contour zirconia
    Ji-Young Kwak, Hyo-Kyung Jung, Il-Kyung Choi, Tae-Yub Kwon
    Restorative Dentistry & Endodontics.2016; 41(2): 106.     CrossRef
  • Effect of Silanization on Microtensile Bond Strength of Different Resin Cements to a Lithium Disilicate Glass Ceramic
    Cristina Parise Gré, Renan C de Ré Silveira, Shizuma Shibata, Carlo TR Lago, Luiz CC Vieira
    The Journal of Contemporary Dental Practice.2016; 17(2): 149.     CrossRef
  • Effects of air abrasion with alumina or glass beads on surface characteristics of CAD/CAM composite materials and the bond strength of resin cements
    ARAO Nobuaki, YOSHIDA Keiichi, SAWASE Takashi
    Journal of Applied Oral Science.2015; 23(6): 629.     CrossRef
  • Resin cement to indirect composite resin bonding: Effect of various surface treatments
    Omer Kirmali, Cagatay Barutcugil, Osman Harorli, Alper Kapdan, Kursat Er
    Scanning.2015; 37(2): 89.     CrossRef
  • Impact of different adhesives on work of adhesion between CAD/CAM polymers and resin composite cements
    Christine Keul, Manuel Müller-Hahl, Marlis Eichberger, Anja Liebermann, Malgorzata Roos, Daniel Edelhoff, Bogna Stawarczyk
    Journal of Dentistry.2014; 42(9): 1105.     CrossRef
  • Effect of Plasma Deposition Using Low-Power/Non-thermal Atmospheric Pressure Plasma on Promoting Adhesion of Composite Resin to Enamel
    Geum-Jun Han, Jae-Hoon Kim, Sung-No Chung, Bae-Hyeock Chun, Chang-Keun Kim, Byeong-Hoon Cho
    Plasma Chemistry and Plasma Processing.2014; 34(4): 933.     CrossRef
  • Bonding efficacy of a self-adhesive resin cement to enamel and dentin
    Linhu Wang, Haixing Xu, Songyang Li, Bin Shi, Rong Li, Mingfu Ye, Jing Yang
    Journal of Wuhan University of Technology-Mater. Sci. Ed..2014; 29(6): 1307.     CrossRef
  • 224 View
  • 2 Download
  • 21 Crossref
Close layer

Restor Dent Endod : Restorative Dentistry & Endodontics
Close layer
TOP