KACD
Search
- Page Path
- HOME > Search
Research Article
- Cyclic fatigue life of Tango-Endo, WaveOne GOLD, and Reciproc NiTi instruments
- Koray Yılmaz, Taha Özyürek
- Restor Dent Endod 2017;42(2):134-139. Published online April 11, 2017
- DOI: https://doi.org/10.5395/rde.2017.42.2.134
-
Abstract
PDF
PubReader
ePub Objectives To compare the fatigue life of Tango-Endo, WaveOne GOLD, and Reciproc NiTi instruments under static model via artificial canals with different angles of curvature.
Materials and Methods Reciproc R25, WaveOne GOLD Primary, and Tango-Endo instruments were included in this study (
n = 20). All the instruments were rotated in artificial canals which were made of stainless steel with an inner diameter of 1.5 mm, 45°, 60°, and 90° angles of curvatures and a radius of curvature of 5 mm until fracture occurred, and the time to fracture was recorded in seconds using a digital chronometer. The data were analyzed using Kruskal-Wallis andpost-hoc Dunn tests were used for the statistical analysis of data in SPSS 21.0 software.Results Tango-Endo files were found to have significantly higher values than WaveOne GOLD and Reciproc files in terms of fatigue life (
p < 0.05). However, there was no statistically significant difference between fatigue life of Reciproc and WaveOne GOLD files (p > 0.05). It was determined that increasing the angle of curvature of the stainless canals caused significant decreases in fatigue life of all of three files (p < 0.05).Conclusions Within the limitations of the present study, the cyclic fatigue life of Tango-Endo in canals having different angles of curvature was statistically higher than Reciproc and WaveOne GOLD.
-
Citations
Citations to this article as recorded by
- Apically extruded debris of different file systems used with various kinematic movements during retreatment: An in vitro study
Tuğba Koşar, Davut Çelik, Tamer Taşdemir
Australian Endodontic Journal.2023; 49(S1): 33. CrossRef - Nickel-titanium files in endodontics: Development, improvement and modifications of nickel-titanium alloy
Slavoljub Zivkovic, Milica Jovanovic-Medojevic, Jelena Neskovic, Marijana Popovic-Bajic
Vojnosanitetski pregled.2023; 80(3): 262. CrossRef - FATIGUE FAILURE OF NICKEL-TITANIUM INSTRUMENTS IN ENDODONTICS AND ITS INFLUENCING FACTORS
A Jusku, T Dodeková, J Staněk, B Özel, P Jirásek, V Polanská, Ľ Harvan
Česká stomatologie a praktické zubní lékařství.2022; 122(2): 51. CrossRef - Reciproc Endodontic File Surface Defects After Single Use
Mohammed Howait
Journal of International Society of Preventive and Community Dentistry.2021; 11(1): 98. CrossRef - A comparative evaluation of cyclic fatigue resistance of Reciproc Blue, WaveOne Gold and 2Shape nickel–titanium rotary files in different artificial canals
Ankita Grace Lall, Suparna Ganguly Saha, Vijay Alageshan, Parmeet Banga
Endodontology.2021; 33(1): 1. CrossRef - Cutting efficiency of heat‐treated nickel–titanium single‐file systems at different incidence angles
Eugenio Pedullà, Pietro La Paglia, Giusy Rita Maria La Rosa, Anna Maria Gueli, Stefania Pasquale, David E. Jaramillo, Leopoldo Forner, Fabio Lo Savio, Guido La Rosa, Ernesto Rapisarda
Australian Endodontic Journal.2021; 47(1): 20. CrossRef - Influence of the type of reciprocating motion on the cyclic fatigue resistance of reciprocating files in a dynamic model
Álvaro Zubizarreta-Macho, Alberto Albaladejo Martínez, Carlos Falcão Costa, Norberto Quispe-López, Ruben Agustín-Panadero, Jesús Mena-Álvarez
BMC Oral Health.2021;[Epub] CrossRef - Cutting efficiency of conventional and heat‐treated nickel–titanium rotary or reciprocating glide path instruments
E. Pedullà, G. Leanza, G. R. M. La Rosa, A. M. Gueli, S. Pasquale, G. Plotino, E. Rapisarda
International Endodontic Journal.2020; 53(3): 376. CrossRef - Influence of static and dynamic cyclic fatigue tests on the lifespan of four reciprocating systems at different temperatures
A. Keleş, A. Eymirli, O. Uyanık, E. Nagas
International Endodontic Journal.2019; 52(6): 880. CrossRef - Comparison of Cyclic Fatigue Resistance of 5 Heat-treated Nickel-titanium Reciprocating Systems in Canals with Single and Double Curvatures
Mohammad I. Al-Obaida, Khalid Merdad, Mohammed S. Alanazi, Hesham Altwaijry, Mohammad AlFaraj, Ali A. Alkhamis, Ebtissam M. Al-Madi
Journal of Endodontics.2019; 45(10): 1237. CrossRef - Assessment of mechanical properties of WaveOne Gold Primary reciprocating instruments
Tong FANGLI, Keiichiro MAKI, Shunsuke KIMURA, Miki NISHIJO, Daisuke TOKITA, Arata EBIHARA, Takashi OKIJI
Dental Materials Journal.2019; 38(3): 490. CrossRef - Comparison between Single-file Rotary Systems: Part 2—The Effect of Length of the Instrument Subjected to Cyclic Loading on Cyclic Fatigue Resistance
Adham A. Azim, Mohamed Tarrosh, Katharina A. Azim, Lucila Piasecki
Journal of Endodontics.2018; 44(12): 1837. CrossRef - Comparison of cyclic fatigue resistance of XP-endo Shaper, HyFlex CM, FlexMaster and Race instruments
Mehmet Adiguzel, Ipek Isken, Ismail Ilker Pamukcu
Journal of Dental Research, Dental Clinics, Dental Prospects.2018; 12(3): 208. CrossRef
- Apically extruded debris of different file systems used with various kinematic movements during retreatment: An in vitro study
- 234 View
- 3 Download
- 13 Crossref
First
Prev
