Skip Navigation
Skip to contents

Restor Dent Endod : Restorative Dentistry & Endodontics

OPEN ACCESS

Author index

Page Path
HOME > Browse articles > Author index
Search
Joonghee Ahn 1 Article
Effect of additional etching and ethanol-wet bonding on the dentin bond strength of one-step self-etch adhesives
Joonghee Ahn, Kyoung-Hwa Jung, Sung-Ae Son, Bock Hur, Yong-Hoon Kwon, Jeong-Kil Park
Restor Dent Endod 2015;40(1):68-74.   Published online November 18, 2014
DOI: https://doi.org/10.5395/rde.2015.40.1.68
AbstractAbstract PDFPubReaderePub
Objectives

This study examined the effects of additional acid etching on the dentin bond strength of one-step self-etch adhesives with different compositions and pH. The effect of ethanol wetting on etched dentin bond strength of self-etch adhesives was also evaluated.

Materials and Methods

Forty-two human permanent molars were classified into 21 groups according to the adhesive types (Clearfil SE Bond [SE, control]; G-aenial Bond [GB]; Xeno V [XV]; Beauti Bond [BB]; Adper Easy Bond [AE]; Single Bond Universal [SU]; All Bond Universal [AU]), and the dentin conditioning methods. Composite resins were placed on the dentin surfaces, and the teeth were sectioned. The microtensile bond strength was measured, and the failure mode of the fractured specimens was examined. The data were analyzed statistically using two-way ANOVA and Duncan's post hoc test.

Results

In GB, XV and SE (pH ≤ 2), the bond strength was decreased significantly when the dentin was etched (p < 0.05). In BB, AE and SU (pH 2.4 - 2.7), additional etching did not affect the bond strength (p > 0.05). In AU (pH = 3.2), additional etching increased the bond strength significantly (p < 0.05). When adhesives were applied to the acid etched dentin with ethanol-wet bonding, the bond strength was significantly higher than that of the no ethanol-wet bonding groups, and the incidence of cohesive failure was increased.

Conclusions

The effect of additional acid etching on the dentin bond strength was influenced by the pH of one-step self-etch adhesives. Ethanol wetting on etched dentin could create a stronger bonding performance of one-step self-etch adhesives for acid etched dentin.

Citations

Citations to this article as recorded by  
  • Influence of Different Application Modes of a Universal Adhesive System on the Bond Strength of Bulk‐Fill Composite Resin to Enamel and Dentin in Primary Teeth
    Ali Nozari, Maryam Pakniyat Jahromi, Farnaz Haji Abbas Oghli, Zahra Jowkar, Seyed Ahmadreza Hamidi
    Clinical and Experimental Dental Research.2024;[Epub]     CrossRef
  • Effect of a novel pretreatment on the microtensile bond strength of universal adhesives with dentin
    Yixiang Pan, Jiajia Xu, Xue Cai, Xiaodong Li, Xiaoyan Wang
    Journal of Dental Sciences.2023; 18(3): 1148.     CrossRef
  • Microfluidic Organ-on-A-chip: A Guide to Biomaterial Choice and Fabrication
    Uyen M. N. Cao, Yuli Zhang, Julie Chen, Darren Sayson, Sangeeth Pillai, Simon D. Tran
    International Journal of Molecular Sciences.2023; 24(4): 3232.     CrossRef
  • Effect of phytic acid on bond strength and interfacial integrity of universal adhesive to deep dentin
    Ahmed Mostafa Attia, Ahmed Fawzy Abo-Elezz, Rehab Khalil Safy
    Brazilian Dental Journal.2022; 33(5): 116.     CrossRef
  • Microtensile Bond Strength of Total-Etch and Self-Etch Universal Adhesives Containing 10-MDP: A Systematic Review
    I. Hisham Ismail, N.A. Abdul Razak, N.D. Mohd Ramzi, M.Y.P. Mohd Yusof
    The Journal of Dentists.2022; 10: 12.     CrossRef
  • Biomodification of dentin collagen by primers with crosslinking reagents using ethanol wet bonding technique
    Talita Arrais Daniel Mendes, Samuel Chillavert Dias Pascoal, Marcelo Victor Sidou Lemos, Sérgio Lima Santiago, Juliano Sartori Mendonça
    International Journal of Adhesion and Adhesives.2022; 119: 103254.     CrossRef
  • Is the presence of 10-MDP associated to higher bonding performance for self-etching adhesive systems? A meta-analysis of in vitro studies
    Julia Fehrenbach, Cristina Pereira Isolan, Eliseu Aldrighi Münchow
    Dental Materials.2021; 37(10): 1463.     CrossRef
  • The effect of additional chlorhexidine and/or ethanol on the bond strength of universal adhesives
    Zeynep Buket Kaynar, Magrur Kazak, Nazmiye Donmez, Evrim Eliguzeloglu Dalkilic
    Journal of Adhesion Science and Technology.2021; 35(4): 375.     CrossRef
  • Evaluation of the Effect of Cold Plasma Treatment on the Microshear Bond Strength of Composite Resin Restorations to Dentin using Different Adhesive Systems and the Effect of Thermocycling
    Sara Valizadeh, Elham Farhadi, Aida Moradi, Sedighe S. Hashemikamangar
    The Open Dentistry Journal.2021; 15(1): 734.     CrossRef
  • Bond Strength of Universal Adhesives to Dentin: A Systematic Review and Meta-Analysis
    Louis Hardan, Rim Bourgi, Naji Kharouf, Davide Mancino, Maciej Zarow, Natalia Jakubowicz, Youssef Haikel, Carlos Enrique Cuevas-Suárez
    Polymers.2021; 13(5): 814.     CrossRef
  • Effects of simplified ethanol–wet bonding and hydrophobic coating on resin–dentin bonding properties
    Xia Wang, He Li, Liang Chen, Yue Wang, Jianfei Bai, Defei Wang, Hong Liu
    Journal of Adhesion Science and Technology.2021; 35(9): 913.     CrossRef
  • Effect of dentin biomodification techniques on the stability of the bonded interface
    Nida Mehmood, Rajni Nagpal, UdaiPratap Singh, Meenal Agarwal
    Journal of Conservative Dentistry.2021; 24(3): 265.     CrossRef
  • Assessment of nanohardness, elastic modulus, and nanoleakage of the adhesive interface using the ethanol-wet-bonding technique
    Mauricio Yugo Souza, Jéssica Lopes Andrade, Taciana Marco Ferraz Caneppele, Eduardo Bresciani
    International Journal of Adhesion and Adhesives.2020; 99: 102572.     CrossRef
  • The improvement of biocompatibility of adhesives
    Cigdem Atalayin, Huseyin Tezel, Zeynep Ergucu, Nimet Unlu, Guliz Armagan, Taner Dagci, Timur Kose
    Clinical Oral Investigations.2019; 23(8): 3213.     CrossRef
  • Comparison of the micro-tensile bond strengths of four different universal adhesives to caries-affected dentin after ER:YAG laser irradiation
    Nazmiye DÖNMEZ, Ayça Sarıalioğlu GÜNGÖR, Barış KARABULUT, Şeyda Hergüner SİSO
    Dental Materials Journal.2019; 38(2): 218.     CrossRef
  • Six-month performance of restorations produced with the ethanol-wet-bonding technique: a randomized trial
    Maurício Yugo de SOUZA, Ana Luiza Barbosa JUREMA, Taciana Marco Ferraz CANEPPELE, Eduardo BRESCIANI
    Brazilian Oral Research.2019;[Epub]     CrossRef
  • Influence of ethanol-wet dentin, adhesive mode of application, and aging on bond strength of universal adhesive
    Mauricio Yugo de SOUZA, Rebeca DI NICOLÓ, Eduardo BRESCIANI
    Brazilian Oral Research.2018;[Epub]     CrossRef
  • Effects of light curing modes and ethanol-wet bonding on dentin bonding properties
    Mu-zi Li, Jin-rui Wang, Hong Liu, Xia Wang, Kang Gan, Xiu-ju Liu, De-li Niu, Xiao-qing Song
    Journal of Zhejiang University-SCIENCE B.2016; 17(9): 703.     CrossRef
  • Effect of an Er,Cr:YSGG laser preparation on dentin bond strength of a universal adhesive
    A. Rüya Yazici, Emel Karaman, Duygu Tuncer, Gizem Berk, Atilla Ertan
    Journal of Adhesion Science and Technology.2016; 30(22): 2477.     CrossRef
  • The effect of saliva decontamination procedures on dentin bond strength after universal adhesive curing
    Jayang Kim, Sungok Hong, Yoorina Choi, Sujung Park
    Restorative Dentistry & Endodontics.2015; 40(4): 299.     CrossRef
  • 250 View
  • 2 Download
  • 20 Crossref
Close layer

Restor Dent Endod : Restorative Dentistry & Endodontics
Close layer
TOP