Restorative Dentistry & Endodontics

Hyo-Jin Jeon

1 Article

Effect of repetitive pecking at working length for glide path preparation using G-file: Jung-Hong Ha, Hyo-Jin Jeon, Rashid El Abed, Seok-Woo Chang, Sung-Kyo Kim, Hyeon-Cheol Kim; Restor Dent Endod 2015;40(2):123-127. Published online January 7, 2015; DOI: https://doi.org/10.5395/rde.2015.40.2.123

Objectives

Glide path preparation is recommended to reduce torsional failure of nickel-titanium (NiTi) rotary instruments and to prevent root canal transportation. This study evaluated whether the repetitive insertions of G-files to the working length maintain the apical size as well as provide sufficient lumen as a glide path for subsequent instrumentation.

Materials and Methods

The G-file system (Micro-Mega) composed of G1 and G2 files for glide path preparation was used with the J-shaped, simulated resin canals. After inserting a G1 file twice, a G2 file was inserted to the working length 1, 4, 7, or 10 times for four each experimental group, respectively (n = 10). Then the canals were cleaned by copious irrigation, and lubricated with a separating gel medium. Canal replicas were made using silicone impression material, and the diameter of the replicas was measured at working length (D0) and 1 mm level (D1) under a scanning electron microscope. Data was analysed by one-way ANOVA and post-hoc tests (p = 0.05).

Results

The diameter at D0 level did not show any significant difference between the 1, 2, 4, and 10 times of repetitive pecking insertions of G2 files at working length. However, 10 times of pecking motion with G2 file resulted in significantly larger canal diameter at D1 (p < 0.05).

Conclusions

Under the limitations of this study, the repetitive insertion of a G2 file up to 10 times at working length created an adequate lumen for subsequent apical shaping with other rotary files bigger than International Organization for Standardization (ISO) size 20, without apical transportation at D0 level.

Citations

Citations to this article as recorded by

Glide Path – An Ineluctable Route for Successful Endodontic Mechanics: A Literature Review
Mahima Bharat Mehta, Anupam Sharma, Aniket Jadhav, Aishwarya Handa, Abhijit Bajirao Jadhav, Ashwini A. Narayanan
Journal of the International Clinical Dental Research Organization.2024; 16(2): 101. CrossRef
Effect of repetitive up-and-down movements on torque/force generation, surface defects and shaping ability of nickel-titanium rotary instruments: an ex vivo study
Moe Sandar Kyaw, Arata Ebihara, Yoshiko Iino, Myint Thu, Keiichiro Maki, Shunsuke Kimura, Pyae Hein Htun, Takashi Okiji
BMC Oral Health.2024;[Epub] CrossRef
Influence of the Number of Pecking Motions at Working Length on the Shaping Ability of Single-file Systems in Long Oval-shaped Curved Canals
Lixiao Wang, Ruitian Lin, Hui Chen, Zihan Li, Franklin R. Tay, Lisha Gu
Journal of Endodontics.2022; 48(4): 548. CrossRef
Influence of pecking frequency at working length on the volume of apically extruded debris: A micro-computed tomography analysis
Li-Xiao Wang, Hui Chen, Rui-Tian Lin, Li-Sha Gu
Journal of Dental Sciences.2022; 17(3): 1274. CrossRef
Comparison of the effects from coronal pre‐flaring and glide‐path preparation on torque generation during root canal shaping procedure
Sang Won Kwak, Jung‐Hong Ha, Ya Shen, Markus Haapasalo, Hyeon‐Cheol Kim
Australian Endodontic Journal.2022; 48(1): 131. CrossRef
Effective Establishment of Glide-Path to Reduce Torsional Stress during Nickel-Titanium Rotary Instrumentation
Ibrahim H. Abu-Tahun, Sang Won Kwak, Jung-Hong Ha, Asgeir Sigurdsson, Mehmet Baybora Kayahan, Hyeon-Cheol Kim
Materials.2019; 12(3): 493. CrossRef
Stress Generation during Pecking Motion of Rotary Nickel-titanium Instruments with Different Pecking Depth
Jung-Hong Ha, Sang Won Kwak, Asgeir Sigurdsson, Seok Woo Chang, Sung Kyo Kim, Hyeon-Cheol Kim
Journal of Endodontics.2017; 43(10): 1688. CrossRef
Debris extrusion by glide-path establishing endodontic instruments with different geometries
Jung-Hong Ha, Sung Kyo Kim, Sang Won Kwak, Rashid El Abed, Yong Chul Bae, Hyeon-Cheol Kim
Journal of Dental Sciences.2016; 11(2): 136. CrossRef
Effects of Pitch Length and Heat Treatment on the Mechanical Properties of the Glide Path Preparation Instruments
Sang Won Kwak, Jung-Hong Ha, Chan-Joo Lee, Rashid El Abed, Ibrahim H. Abu-Tahun, Hyeon-Cheol Kim
Journal of Endodontics.2016; 42(5): 788. CrossRef

248 View
4 Download
9 Crossref

Author index