Restorative Dentistry & Endodontics

Eman Z. Al-Shehri

1 Article

Effects of air-abrasion pressure on the resin bond strength to zirconia: a combined cyclic loading and thermocycling aging study: Eman Z. Al-Shehri, Afnan O. Al-Zain, Alaa H. Sabrah, Sarah S. Al-Angari, Laila Al Dehailan, George J. Eckert, Mutlu Özcan, Jeffrey A. Platt, Marco C. Bottino; Restor Dent Endod 2017;42(3):206-215. Published online June 5, 2017; DOI: https://doi.org/10.5395/rde.2017.42.3.206

Objectives

To determine the combined effect of fatigue cyclic loading and thermocycling (CLTC) on the shear bond strength (SBS) of a resin cement to zirconia surfaces that were previously air-abraded with aluminum oxide (Al₂O₃) particles at different pressures.

Materials and Methods

Seventy-two cuboid zirconia specimens were prepared and randomly assigned to 3 groups according to the air-abrasion pressures (1, 2, and 2.8 bar), and each group was further divided into 2 groups depending on aging parameters (n = 12). Panavia F 2.0 was placed on pre-conditioned zirconia surfaces, and SBS testing was performed either after 24 hours or 10,000 fatigue cycles (cyclic loading) and 5,000 thermocycles. Non-contact profilometry was used to measure surface roughness. Failure modes were evaluated under optical and scanning electron microscopy. The data were analyzed using 2-way analysis of variance and χ² tests (α = 0.05).

Results

The 2.8 bar group showed significantly higher surface roughness compared to the 1 bar group (p < 0.05). The interaction between pressure and time/cycling was not significant on SBS, and pressure did not have a significant effect either. SBS was significantly higher (p = 0.006) for 24 hours storage compared to CLTC. The 2 bar-CLTC group presented significantly higher percentage of pre-test failure during fatigue compared to the other groups. Mixed-failure mode was more frequent than adhesive failure.

Conclusions

CLTC significantly decreased the SBS values regardless of the air-abrasion pressure used.

Citations

Citations to this article as recorded by

Shear bond strength of resin to additively manufactured zirconia with different surface treatments
Yanru Shen, Xiang Wang, Chen Yang, Ying Jiang, Feng Wang, Li Peng, Yongsheng Zhou, Yuchun Sun
Surfaces and Interfaces.2024; 54: 105153. CrossRef
Multiscale analysis of the compressive behaviour of polymer-based composites reinforced by hybrid Al2O3/Al fibres
Hao Tang, Jiaqi Xu, Constantinos Soutis, Aleksey Yerokhin
Composites Science and Technology.2024; 255: 110718. CrossRef
An Advanced Surface Treatment Technique for Coating Three-Dimensional-Printed Polyamide 12 by Hydroxyapatite
Abdulaziz Alhotan, Saleh Alhijji, Sahar Ahmed Abdalbary, Rania E. Bayoumi, Jukka P. Matinlinna, Tamer M. Hamdy, Rasha M. Abdelraouf
Coatings.2024; 14(9): 1181. CrossRef
Does incorporation of TiO 2 nanotubes in air-abraded high translucent zirconia influence shear bond strength?*
Bahadır Ezmek, Osman Cumhur Sipahi
Journal of Adhesion Science and Technology.2023; 37(22): 3206. CrossRef
Effects of aging and light-curing unit type on the volume and internal porosity of bulk-fill resin composite restoration
Afnan O. Al-Zain, Elaf A. Alboloshi, Walaa A. Amir, Maryam A. Alghilan, Eliseu A. Münchow
The Saudi Dental Journal.2022; 34(3): 243. CrossRef
Influence of surface treatments and cyclic fatigue on subsurface defects and mechanical properties of zirconia frameworks
Alaaeldin Elraggal, Nikolaos Silikas, Moustafa Aboushelib
Dental Materials.2021; 37(5): 905. CrossRef
Effects of low-temperature degradation on the surface roughness of yttria-stabilized tetragonal zirconia polycrystal ceramics: A systematic review and meta-analysis
Hui Yang, Yi-Li Xu, Guang Hong, Hao Yu
The Journal of Prosthetic Dentistry.2021; 125(2): 222. CrossRef
Effect of surface treatments on repair strength, roughness and morphology in aged metal-free crowns
Yançanã Luizy Gruber, Thaís Emanuelle Bakaus, Bruna Fortes Bittencourt, João Carlos Gomes, Alessandra Reis, Giovana Mongruel Gomes
Brazilian Journal of Oral Sciences.2020; 19: e206155. CrossRef
Retentive Force of Glass-Ceramic Soldered Customized Zirconia Abutment Copings with Prefabricated Titanium Bases
Jeremias Hey, Monika Kasaliyska, Andreas Kiesow, Ramona Schweyen, Christin Arnold
Materials.2020; 13(14): 3193. CrossRef
Solvent-aided direct adhesion of a metal/polymer joint using micro/nano hierarchical structures
Gyosik Jun, Jeong-Won Lee, Younghun Shin, Kihwan Kim, Woonbong Hwang
Journal of Materials Processing Technology.2020; 285: 116744. CrossRef
Study of physicochemical properties and effects on bonding to zirconia ceramics of five resin cements
Xiuju Liu, Zhaoying Liu, Xuan Li, Han Wang, Gaigai Yu, Song Zhu
Journal of Adhesion Science and Technology.2020; 34(18): 2031. CrossRef
The effect of air-particle abrasion and a zirconia primer application on resin cement bonding strength to zirconia
Alana M. Dantas, Fernanda Campos, Sarina M. Pereira, Elis J. dos Santos, Laudenice L. Pereira, Dayanne M. Moura, Rodrigo O. Souza
Minerva Stomatologica.2019;[Epub] CrossRef
Influence of Non-Thermal Atmospheric Pressure Plasma Treatment on Shear Bond Strength between Y-TZP and Self-Adhesive Resin Cement
Dae-Sung Kim, Jong-Ju Ahn, Eun-Bin Bae, Gyoo-Cheon Kim, Chang-Mo Jeong, Jung-Bo Huh, So-Hyoun Lee
Materials.2019; 12(20): 3321. CrossRef
Effect of airborne particle abrasion and sintering order on the surface roughness and shear bond strength between Y-TZP ceramic and resin cement
Yener OKUTAN, Munir Tolga YUCEL, Tugce GEZER, Mustafa Borga DONMEZ
Dental Materials Journal.2019; 38(2): 241. CrossRef

292 View
3 Download
14 Crossref

Author index