-
Influence of modeling agents on the surface properties of an esthetic nano-hybrid composite
-
Zeynep Bilge Kutuk, Ecem Erden, Damla Lara Aksahin, Zeynep Elif Durak, Alp Can Dulda
-
Restor Dent Endod 2020;45(2):e13. Published online January 29, 2020
-
DOI: https://doi.org/10.5395/rde.2020.45.e13
-
-
Abstract
PDF PubReader ePub
- Objective
The aim of this study was to evaluate the influence of different modeling agents on the surface microhardness (Vickers hardness number; VHN), roughness (Ra), and color change (ΔE) of a nano-hybrid composite with or without exposure to discoloration by coffee. Materials and MethodsSixty-four cylinder-shaped nano-hybrid composite specimens were prepared using a Teflon mold. The specimens' surfaces were prepared according to the following groups: group 1, no modeling agent; group 2, Modeling Liquid; group 3, a universal adhesive (G-Premio Bond); and group 4, the first step of a 2-step self-adhesive system (OptiBond XTR). Specimens were randomly allocated into 2 groups (n = 8) according to the storage medium (distilled water or coffee). VHN, Ra, and ΔE were measured at 24 hours, 1 week, and 6 weeks. The Kruskal-Wallis test followed by the Bonferroni correction for pairwise comparisons was used for statistical analysis (α = 0.05). ResultsStorage time did not influence the VHN of the nano-hybrid composite in any group (p > 0.05). OptiBond XTR Primer application affected the VHN negatively in all investigated storage medium and time conditions (p < 0.05). Modeling Liquid application yielded improved Ra values for the specimens stored in coffee at each time point (p < 0.05). Modeling Liquid application was associated with the lowest ΔE values in all investigated storage medium and time conditions (p < 0.05). ConclusionDifferent types of modeling agents could affect the surface properties and discoloration of nano-hybrid composites.
-
Citations
Citations to this article as recorded by 
- Do modeling liquid and glycerin gel compromise the color stability of one-shade composites
Ezgi Erden Kayalidere, Merve Sahin Odontology.2026;[Epub] CrossRef - Influence of Placement Techniques on Marginal Integrity, Wear Behavior, and Clinical Efficiency of a Bulk-Fill Resin Composite
Kerem Can Işık, Handan Yıldırım-Işık, Uğur Tuna Sazlıkoğlu, Mediha Büyükgöze-Dindar Journal of Functional Biomaterials.2026; 17(3): 108. CrossRef - Assessment of Monomer Release From Resin Composites Following the Use of Various Modeling Liquids
Dorukcan Yıldırım, Hüseyin Hatırlı, Emine Şirin Karaarslan, Tarık Balkan Journal of Esthetic and Restorative Dentistry.2026;[Epub] CrossRef - Influence of modeling liquids and adhesive agents on the surface properties of resin composite
Mert Karakaş, Hacer Deniz Arısu BMC Oral Health.2026;[Epub] CrossRef - Comparative Evaluation of Microbial Adhesion and Surface Morphology of Bonded and Non‐Bonded Resin‐Based Composite Materials: A SEM and Microbiological Study
Musab Hamed Saeed, Hafiz Ahmad, Lovely M. Annamma, Tareq Aljafarawi, Melahat Gorduysus, Sudhir Rama Varma, Mehmet Omer Gorduysus, Esraa Jaber, Hannah Wesley International Journal of Dentistry.2026;[Epub] CrossRef - Effect of modeling liquids on surface roughness, gloss, and color stability of a nanohybrid resin composite: an in vitro study
Metin Bakir, Savaş Sağmak BMC Oral Health.2026;[Epub] CrossRef - Effect of Wetting Agents on Microhardness, Color, and Gloss of a Nanohybrid Composite after Aging
Valeria Bisinoto Gotti, Rafael Martins Chagas, Isabela Torres Resende, João Vitor da Silva Duarte, Marcella Bessa Palhares, Analia Gabriella Borges Ferraz Facury, César Penazzo Lepri, Vinícius Geraldo Martins, Ana Paula Ayres Oliveira Brazilian Dental Journal.2026;[Epub] CrossRef - The Impact of Modeling Liquids on Surface Roughness and Color Properties of Bulkfill Resin Composites After Simulated Tooth Brushing: An in Vitro Study. Part I
Camila Falconí‐Páez, Claudia González‐Vaca, Juliana Guarneri, Newton Fahl, Paulina Aliaga‐Sancho, Maria Lujan Mendez‐Bauer, Cesar Augusto Galvão Arrais, Andrés Dávila‐Sánchez Journal of Esthetic and Restorative Dentistry.2025; 37(2): 514. CrossRef - Coating Agents for Resin Composites: Effect on Color Stability, Roughness, and Surface Micromorphology Subjected to Brushing Wear
FR Hojo, TC Martins, WF Vieira-Junior, FMG França, CP Turssi, RT Basting Operative Dentistry.2025; 50(1): 101. CrossRef - Effect of modeling liquid application on color stability and surface roughness of single-shade composites
Melek Güven Bekdaş, Ihsan Hubbezoglu BMC Oral Health.2025;[Epub] CrossRef - Influence of modeling liquids on the color adaptation and optical properties of single and simply shade resin composites
Bengü Doğu Kaya, Mehmet Buldur, Burcu Gözetici-Çil Odontology.2025;[Epub] CrossRef - Effect of modeling liquids on Vickers microhardness, flexural strength and color stability of resin-based composites
Ahmed Alshawi, Benin Dikmen, Sevda Ozel Yildiz, Ugur Erdemir Materials Research Express.2025; 12(11): 115402. CrossRef - Does composite repair time affect repair protocol, immediate or delayed?
Murat Can Ersen, Nevin Cobanoglu BMC Oral Health.2025;[Epub] CrossRef - Impact of combining dental composite brushes with modeling resins on the color stability and topographic features of composites
Abdulrahman A Balhaddad, Faisal Alharamlah, Alhanoof Aldossary, Wejdan Almutairi, Turki Alshehri, Mary Anne S Melo, Afnan O Al-Zain, Eman H Ismail Journal of Applied Biomaterials & Functional Materials.2024;[Epub] CrossRef - Investigation of the Degree of Monomer Conversion in Dental Composites through Various Methods: An In Vitro Study
Musa Kazim Ucuncu, Ozge Celiksoz, Emine Sen, Yasemin Yucel Yucel, Bircan Dinc Applied Sciences.2024; 14(11): 4406. CrossRef - EFEITO DOS LÍQUIDOS MODELADORES NA SUPERFÍCIE DA RESINA COMPOSTA – UMA REVISÃO DE LITERATURA
Samuel Silva Dias, Matheus Fernando Lopes, Jeffison Teles Dias, Caio Junji Tanaka, Jose Augusto Rodrigues RECIMA21 - Revista Científica Multidisciplinar - ISSN 2675-6218.2024; 5(2): e524899. CrossRef - Effect of Instrument Lubricant on Mechanical Properties of Restorative Composite
G Pippin, D Tantbirojn, M Wolfgang, JS Nordin, A Versluis Operative Dentistry.2024; 49(4): 475. CrossRef - Full analysis of the effects of modeler liquids on the properties of direct resin-based composites: a meta-analysis review of in vitro studies
Eduardo Trota Chaves, Lisia Lorea Valente, Eliseu Aldrighi Münchow Clinical Oral Investigations.2023; 27(7): 3289. CrossRef - Influence of Modeling Liquids and Universal Adhesives Used as Lubricants on Color Stability and Translucency of Resin-Based Composites
Gaetano Paolone, Claudia Mazzitelli, Giacomo Zechini, Salvatore Scolavino, Cecilia Goracci, Nicola Scotti, Giuseppe Cantatore, Enrico Gherlone, Alessandro Vichi Coatings.2023; 13(1): 143. CrossRef - Influence of Instrument Lubrication on Properties of Dental Composites
Juliusz Kosewski, Przemysław Kosewski, Agnieszka Mielczarek European Journal of Dentistry.2022; 16(04): 719. CrossRef - Effect of Modelıng Liquid Use on Color and Whiteness Index Change of Composite Resins
Numan AYDIN, Serpil KARAOĞLANOĞLU, Bilge ERSÖZ Cumhuriyet Dental Journal.2022; 25(Supplement): 119. CrossRef - Effects of Immediate Coating on Unset Composite with Different Bonding Agents to Surface Hardness
Nantawan Krajangta, Supissara Ninbanjong, Sunisa Khosook, Kanjana Chaitontuak, Awiruth Klaisiri European Journal of Dentistry.2022; 16(04): 828. CrossRef - Modeling Liquids and Resin-Based Dental Composite Materials—A Scoping Review
Gaetano Paolone, Claudia Mazzitelli, Uros Josic, Nicola Scotti, Enrico Gherlone, Giuseppe Cantatore, Lorenzo Breschi Materials.2022; 15(11): 3759. CrossRef - Shear Bond Strength of Composite Diluted with Composite-Handling Agents on Dentin and Enamel
Mijoo Kim, Deuk-Won Jo, Shahed Al Khalifah, Bo Yu, Marc Hayashi, Reuben H. Kim Polymers.2022; 14(13): 2665. CrossRef - Effect of Modeling Resins on Microhardness of Resin Composites
Ezgi T. Bayraktar, Pinar Y. Atali, Bora Korkut, Ezgi G. Kesimli, Bilge Tarcin, Cafer Turkmen European Journal of Dentistry.2021; 15(03): 481. CrossRef
-
3,338
View
-
48
Download
-
25
Crossref
|